Home / Soundstop Acoustical

Flagship Product Line

Soundstop™ Acoustical Flooring

BA-cored acoustical LVT with an integrated soundmat β€” STC 61 / IIC 56 / HIIC 68 on a wood assembly with no separate sound mat. The floor multi-family and hospitality specifiers choose when the assembly has to pass acoustical inspection.

STC 61

Airborne sound transmission β€” voices, TV, music β€” tested on a wood floor assembly with no separate sound mat.

IIC 56

Impact insulation β€” footsteps and dropped objects β€” with the acoustic backing attached directly under the wear layer.

HIIC 68

High-frequency impact β€” the metric that best predicts the quiet occupants actually perceive.

Headline results: Soundstop Glue Down, no soundmat, wood assembly. The full certified matrix is below.

Interactive Β· See & Hear

Hear the difference for yourself.

Click through the Soundstop story at your own pace β€” and on slide 8, play two certified lab tapping recordings back to back: a floor with a separate underlayment versus Soundstop's built-in soundmat. Same test, audibly quieter. It's why Soundstop hits STC 61 / IIC 56 / HIIC 68 on a wood assembly with no separate sound mat β€” and passes acoustical inspection.

Prefer to talk it through? Call (512) 503-2106 β€” we'll read the deck against your assembly.

Up Close

Soundstop UpClose

The layer that does the quieting β€” photographed on the actual plank, not a diagram.

Back of a Soundstop plank showing the attached diamond-textured soundmat
Attached Soundmat The sound-dampening layer arrives bonded to the back of every plank β€” no separate underlayment to buy, stage, or install.
Side profile of a Soundstop plank showing the wear surface and attached acoustic pad
Side Profile One plank, edge-on: commercial wear surface, core, and the acoustic pad in a single piece of flooring.
Two Soundstop planks overlapped showing the painted beveled edge seam
Painted Beveled Edges Painted bevels give the installed floor a clean, monolithic look β€” finished seams with no extra trim.

Colorways

The Soundstop Palette

Fifteen wood-look colorways, shared across both Soundstop formats.

Certified Acoustical Test Data

Independently Tested

Independent Intertek / B&C laboratory tests (ASTM E90 / E492 / E1007), grouped by the floor-ceiling assembly tested.

Wood-frame truss + gyp-crete assembly

ProductThicknessSoundmatSTCIICHIIC
Looselay LVT5 mmNone6050β€”
Soundstop Glue Down3 mmNone615668
Soundstop Glue Down3 mmSamN12β€”5864
Soundstop Glue Down3 mmSamN12 Ultra605970
SPC Click5 mmNone615463
Luxe XL5.5 mmNone605968
SPC Click5.5 mmSamN12 / Ultra / ΒΌ″605968–69
SPC Click6.5 mmSamN12605969
SPC Click6.5 mmSamN12 Ultra605972

6″ concrete slab assembly

ProductThicknessSoundmatSTCIICHIIC
Luxe XL5.5 mmβ€”β€”61β€”
SPC Click6.5 mmβ€”535861

Wood truss + gyp-crete: open-web truss with gypsum-concrete topping, R-13 batt insulation, and a resilient-channel 5⁄8″ gypsum-board ceiling. 6″ concrete slab: structural concrete floor-ceiling assembly. Full construction details are available on request.

Contact Advanced Flooring for Testing Reports

The Technology

Sound Control Built Into the Plank

Soundstop uses a BA-cored construction with an integrated acoustic backing, so the sound-dampening layer is bonded to the plank rather than shipped and installed separately. Painted beveled edges give a finished, monolithic look while the core does the acoustic work.

  • Integrated soundmat β€” no loose underlayment to source or install
  • Painted beveled edges for a clean, seamless visual
  • Deletes a material and a trade vs. a separate mat below gypsum
  • Commercial-grade wear layer for high-traffic multi-family and hospitality
BA Core LVT
PDF Download BA Core Technical Brief

Formats

How Soundstop Is Specified

Soundstop comes in two acoustical formats β€” both with the soundmat built into the plank. Choose the one that fits the assembly and the install method.

Acoustical Glue-Down LVT

3–5 mm

Bonds directly to the subfloor with the acoustic backing built in. The low-profile choice for slab and gyp-crete assemblies where a permanent glue-down finish is preferred.

SPC Click

5–6.5 mm

A rigid-core floating floor carrying the same integrated soundmat. No adhesive, faster to install, and the thicker builds carry the highest impact ratings.

First-floor cost saver: on ground floors and slab-on-grade β€” where there's no occupancy below to isolate β€” we supply a visually matching glue-down LVT without the acoustic core. The floor reads continuously across the building while you only pay for acoustic performance where the code actually requires it.

Have a project with an acoustical requirement? Send the floor plan and we'll match the format, supply the test reports, and quote it wholesale.

Request a Spec Estimate

Where Soundstop Performs

Built for the Buildings That Need Quiet

Multi-Family

Apartments and condos with unit-to-unit sound requirements between floors.

Hospitality

Hotels and short-term rentals where guest comfort depends on quiet rooms.

Senior & Student Housing

High-occupancy residential where footfall noise is a constant complaint driver.

Mixed-Use

Residential over retail or amenity space, where assemblies must control transmission.

The Complete Story

Soundstop Sell Sheet

The one-page overview of the Soundstop acoustical system β€” formats, construction, and where it performs. Click the cover to open the full sell sheet.

PDF Open the Soundstop Sell Sheet
Soundstop High-Performance Acoustic Flooring System sell sheet cover

Speccing Soundstop on a Project?

Send the floor plan and the acoustical requirement. We'll match the format, supply the documentation, and quote it wholesale.