Home / Soundstop Acoustical

Flagship Product Line

Soundstop™ Acoustical Flooring

BA-cored acoustical LVT with an integrated soundmat β€” STC 61 / IIC 56 / HIIC 68 on a wood assembly with no separate sound mat (3mm glue-down, test R5773.02). The floor multi-family and hospitality specifiers choose when the assembly has to pass acoustical inspection.

STC 61

Airborne sound transmission β€” voices, TV, music β€” tested on a wood floor assembly with no separate sound mat.

IIC 56

Impact insulation β€” footsteps and dropped objects β€” with the acoustic backing attached directly under the wear layer.

HIIC 68

High-frequency impact β€” the metric that best predicts the quiet occupants actually perceive.

Headline results: Soundstop Glue Down, no soundmat, wood assembly. The full certified matrix is below.

Up Close

Soundstop UpClose

The layer that does the quieting β€” photographed on the actual plank, not a diagram.

Back of a Soundstop plank showing the attached diamond-textured soundmat
Attached Soundmat The sound-dampening layer arrives bonded to the back of every plank β€” no separate underlayment to buy, stage, or install.
Side profile of a Soundstop plank showing the wear surface and attached acoustic pad
Side Profile One plank, edge-on: commercial wear surface, core, and the acoustic pad in a single piece of flooring.
Two Soundstop planks overlapped showing the painted beveled edge seam
Painted Beveled Edges Painted bevels give the installed floor a clean, monolithic look β€” finished seams with no extra trim.

Colorways

The Soundstop Palette

Fifteen wood-look colorways, shared across both Soundstop formats.

Certified Acoustical Test Data

Independently Tested

Independent Intertek / B&C laboratory tests (ASTM E90 / E492 / E1007), grouped by the floor-ceiling assembly tested.

Wood-frame truss + gyp-crete assembly

ProductThicknessSoundmatSTCIICHIIC
Looselay LVT5 mmNone6050β€”
Soundstop Glue Down
Report R5773.02
3 mmNone615668
Soundstop Glue Down
Report R5772.08
3 mmSamN12β€”5864
Soundstop Glue Down3 mmSamN12 Ultra605970
SPC Click5 mmNone615463
Luxe XL5.5 mmNone605968
SPC Click5.5 mmSamN12 / Ultra / ΒΌ″605968–69
SPC Click6.5 mmSamN12605969
SPC Click6.5 mmSamN12 Ultra605972

6″ concrete slab assembly

ProductThicknessSoundmatSTCIICHIIC
Luxe XL5.5 mmβ€”β€”61β€”
SPC Click
Report R5773.01
6.5 mmβ€”535861

Wood truss + gyp-crete: open-web truss with gypsum-concrete topping, R-13 batt insulation, and a resilient-channel 5⁄8″ gypsum-board ceiling. 6″ concrete slab: structural concrete floor-ceiling assembly. Full construction details are available on request.

Contact Advanced Flooring for Testing Reports

The Technology

Sound Control Built Into the Plank

Soundstop uses a BA-cored construction with an integrated acoustic backing, so the sound-dampening layer is bonded to the plank rather than shipped and installed separately. Painted beveled edges give a finished, monolithic look while the core does the acoustic work.

  • Integrated soundmat β€” no loose underlayment to source or install
  • Painted beveled edges for a clean, seamless visual
  • Deletes a material and a trade vs. a separate mat below gypsum
  • Commercial-grade wear layer for high-traffic multi-family and hospitality
BA Core LVT
PDF Download BA Core Technical Brief

Formats

How Soundstop Is Specified

Soundstop comes in two acoustical formats β€” both with the soundmat built into the plank. Choose the one that fits the assembly and the install method.

Acoustical Glue-Down LVT

3–5 mm

Bonds directly to the subfloor with the acoustic backing built in. The low-profile choice for slab and gyp-crete assemblies where a permanent glue-down finish is preferred.

SPC Click

5–6.5 mm

A rigid-core floating floor carrying the same integrated soundmat. No adhesive, faster to install, and the thicker builds carry the highest impact ratings.

First-floor cost saver: on ground floors and slab-on-grade β€” where there's no occupancy below to isolate β€” we supply a visually matching glue-down LVT without the acoustic core. The floor reads continuously across the building while you only pay for acoustic performance where the code actually requires it.

Have a project with an acoustical requirement? Send the floor plan and we'll match the format, supply the test reports, and quote it wholesale.

Request a Spec Estimate

Where Soundstop Performs

Built for the Buildings That Need Quiet

Multi-Family

Apartments and condos with unit-to-unit sound requirements between floors.

Hospitality

Hotels and short-term rentals where guest comfort depends on quiet rooms.

Senior & Student Housing

High-occupancy residential where footfall noise is a constant complaint driver.

Mixed-Use

Residential over retail or amenity space, where assemblies must control transmission.

The Complete Story

Soundstop Sell Sheet

The one-page overview of the Soundstop acoustical system β€” formats, construction, and where it performs. Click the cover to open the full sell sheet.

PDF Open the Soundstop Sell Sheet
Soundstop High-Performance Acoustic Flooring System sell sheet cover

Speccing Soundstop on a Project?

Send the floor plan and the acoustical requirement. We'll match the format, supply the documentation, and quote it wholesale.

Read the FAQ Β· Read the Silent Advantage Β· Soundstop vs. LVT + underlayment